CLI Reference Guide

System Management Commands 271
Different fields in the display are explained as follows:
show system
Use the show system command in User EXEC mode command to display system information.
Syntax
show system [ unit ]
•
unit —The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Unit Description
Switch This field displays the unit identifier assigned to the
switch.
Management Status This field indicates whether the switch is the
Management Switch, a stack member, or the status is
unassigned.
Preconfigured Model Identifier This field displays the model identifier of a preconfigured
switch ready to join the stack. The Model Identifier is a
32-character field assigned by the switch manufacturer to
identify the switch.
Plugged-In Model Identifier This field displays the model identifier of the switch in
the stack. Model Identifier is a 32-character field assigned
by the switch manufacturer to identify the switch.
Switch Status This field indicates the switch status. Possible values for
this state are: OK, Unsupported, CodeMismatch,
ConfigMismatch, or NotPresent
Code Version This field indicates the detected version of code on this
switch.