Users Guide

show uplink brief
Displays the uplink port information.
Syntax
show uplink {brief|detail}
Parameters
brief Enter the keyword brief to display a brief summary of the uplink port information.
detail Enter the keyword detail to display uplink port information with description.
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example (brief)
Dell#show uplink brief
---------------- show uplink brief ---------------------
Interface OK Status Protocol Description
TenGigabitEthernet 0/41 NO up down
TenGigabitEthernet 0/43 NO up down
TenGigabitEthernet 0/44 NO up down
TenGigabitEthernet 0/45 NO up down
TenGigabitEthernet 0/46 NO up down
TenGigabitEthernet 0/47 NO up down
TenGigabitEthernet 0/48 NO up down
TenGigabitEthernet 0/49 NO up down
TenGigabitEthernet 0/50 NO up down
TenGigabitEthernet 0/51 NO up down
TenGigabitEthernet 0/52 NO up down
TenGigabitEthernet 0/53 NO up down
TenGigabitEthernet 0/54 NO up down
TenGigabitEthernet 0/55 NO up down
TenGigabitEthernet 0/56 NO up down
TenGigabitEthernet 1/41 NO up down
TenGigabitEthernet 1/42 NO up down
TenGigabitEthernet 1/43 NO up down
--More--
4 www.force10networks.com (10.11.84.18) 000.000 ms 000.000 ms 000.000 ms
Dell#
Example (detail)
Dell#show uplink detail
---------------- show uplink detail ---------------------
TenGigabitEthernet 0/41 is up, line protocol is down
Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:99
Current address is 00:1e:c9:f1:00:99
Port is not prsent
Pluggable media not present
Interface index is 44634881
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :tenG170001ec9f10099
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed auto
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d19h53m
Queueing strategy: fifo
Input Statistics:
74
Control and Monitoring