Users Guide

PPID Revision : 01
Service Tag : N/A
Expr Svc Code : N/A
Chassis Svce Tag: RTWB200
Fabric Id : C2
Asset tag : test
PSOC FW Rev : 0xb
ICT Test Date : 0-0-0
ICT Test Info : 0x0
Max Power Req : 31488
Fabric Type : 0x3
Fabric Maj Ver : 0x1
Fabric Min Ver : 0x0
SW Manageability: 0x4
HW Manageability: 0x1
Max Boot Time : 3 minutes
Link Tuning : unsupported
Auto Reboot : enabled
Burned In MAC : 00:01:e8:00:ab:03
No Of MACs : 3
Dell#
Related Commands
asset-tag—Assign and store unique asset-tag to the stack member.
show version— Displays the Dell version.
show processes memory—Displays the memory usage based on the running processes.
show system stack-ports— Displays information about the stack ports on all switches in the stack.
show diag— Displays the data plane and management plane input and output statistics of a particular stack
member.
show tech-support
Displays a collection of data from other show commands, necessary for Dell Networking technical support to perform
troubleshooting on Aggregators.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the
stack member designated by unit-id. The range is 0 to 5.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to lter
command output. Refer to CLI Basics for details on ltering commands.
save Enter the keyword save to save the command output.
ash: Save to local ash drive (flash://filename (max 20 chars))
Command Modes
• EXEC Privilege
Control and Monitoring
71