Users Guide

Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack
member to display memory information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The output for show memory command displays the memory usage of LP part (sysdlp) of the system. The
sysdlp is an aggregate task that handles all the tasks running on the CPU.
Example
Dell#show memory
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit 0–5 |
summary | ipc | memory [stack-unit 0–5]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable
sets the number of tasks to display in order of the highest CPU usage in the past
ve (5) seconds. Add the keyword details to display all running processes
(except sysdlp). Refer to Example (management-unit).
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack member ID. The
range is from 0 to 5.
As an option of the show processes cpu command, this option displays CPU
usage for the designated stack member. Or, as an option of
memory, this option
limits the output of memory statistics to the designated stack member. Refer to
Example (stack-unit).
summary (OPTIONAL) Enter the keyword summary to view a summary view CPU utilization
of processes related to line card processing. Refer to Example (summary).
ipc (OPTIONAL) Enter the keyword ipc to display interprocess communication
statistics.
memory (OPTIONAL) Enter the keyword memory to display memory statistics. Refer to
Example (memory).
62
Control and Monitoring