Users Guide

show system stack-unit iom-mode
Displays the current iom-mode (stack/standalone) and the mode congured after next reboot.
Syntax
show system stack-unit unit-number iom-mode
Parameters
unit number <0–5> Enter the number of the member stack unit. The range is from 0 to 5.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.6.(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage information This command is supported on the M I/O, FN410S, and FN410T Aggregators
Example
Dell#show system stack-unit all iom-mode ?
| Pipe through a command
<cr>
Dell#show system stack-unit all iom-mode
Unit Boot-Mode Next-Boot
------------------------------------------------
0 stack stack
1 stack stack
2 stack stack
3 stack stack
4 Not Present
5 Not Present
Dell#
show system stack-unit iom-uplink-speed
Display the uplink speed of the LAG bundles congured on the Flex IO modules installed on the Aggregator.
Syntax
show system stack-unit unit-number iom-uplink-speed
Parameters
unit number <0-5> Enter the number of the member stack unit. The range is from 0 to 5.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.3(0.0) Introduced on the M I/O Aggregator
Usage Information The value under the Boot-speed eld in the output of the show command indicates the uplink speed that is
currently eective on the LAG bundles, whereas the value under the Next-Boot eld indicates the uplink
speed that is applicable for the LAG bundle after the next reboot of the switch.
Example
Dell# show system stack-unit 0 iom-uplink-speed
Unit Boot-speed Next-Boot
Stacking Commands
315