Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
Usage Information By default, the aaa authorization commands command congures the system to check both EXEC
level and CONFIGURATION level commands. Use the command no aaa authorization config-
commands
to enable only EXEC-level command checking.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-
authenticated || none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
name Dene a name for the list of authorization methods.
default Dene the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
accounting
Apply an accounting method list to terminal lines.
Syntax
accounting {exec | commands level} method-list
Parameters
exec Enter the keyword exec to apply an EXEC level accounting method list.
commands level Enter the keywords commands level to apply an EXEC and CONFIGURATION
level accounting method list.
Security
287