Users Guide

Defaults Enabled.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
protocol lldp (Interface)
Enter the LLDP protocol in the INTERFACE mode.
Syntax
[no] protocol lldp
To return to the global LLDP conguration mode, use the no protocol lldp command from Interface
mode.
Defaults Enabled
Command Modes INTERFACE (conf-if-interface-lldp)
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
This command is available only in PMUX mode.
By default, protocol lldp is enabled, To disable, use the no protocol lldp command.
When you enter the LLDP protocol in the Interface context, it overrides global congurations. When you
execute the
no protocol lldp from INTERFACE mode, interfaces begin to inherit the conguration
from global LLDP CONFIGURATION mode.
show lldp neighbors
Display LLDP neighbor information for all interfaces or a specied interface.
Syntax
show lldp neighbors [interface] [detail]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
266
Link Layer Discovery Protocol (LLDP)