Users Guide

Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specic interface.
Syntax
clear lldp neighbors {interface}
Parameters
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults none
Command Modes EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
debug lldp interface
Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming and outgoing
packets.
Syntax
debug lldp interface {interface | all}{events | packet {brief | detail} {tx
| rx | both}}
To disable debugging, use the no debug lldp interface {interface | all}{events}
{packet {brief | detail} {tx | rx | both}} command.
Parameters
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet followed by the slot/port information.
all (OPTIONAL) Enter the keyword all to display information on all interfaces.
events (OPTIONAL) Enter the keyword events to display major events such as timer
events.
Link Layer Discovery Protocol (LLDP)
263