Users Guide

Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint, exceeding
which the link bundle is marked as being
overutilized and alarm is generated
LAG bundle number Number of the LAG bundle
Utilization (In Percent) Trac usage in percentage of the packets
processed by the port channel
Alarm State Indicates whether an alarm is generated if
overutilization of the port channel occurred.
Possible values are Active and Inactive
Interface Slot and port number, and the type of the member
interface of the port channel
Line Protocol Indicates whether the interface is administratively
up or down
Utilization (In Percent) Trac usage in percentage of the packets
processed by the particular member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm State - Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/5 Up 0
Te 0/13 Up 0
show port-channel-ow
Display an egress port in a given port-channel ow.
Syntax
show port-channel-flow port-channel number incoming-interface interface
{ src-mac address dest-mac address {vlan vlanid | ether-type }} [ src-ip
address dest-ip address ] [ src-port number dest-port number ]
Parameters
port-channel
number
Enter the keywords port-channel then the number of the port channel to
display ow information. The range is from 1 to 128.
incoming-interface
interface
Enter the keywords incoming-interface then the interface type and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
src-mac address Enter the keywords src-mac then the MAC source address in the
nn:nn:nn:nn:nn:nn format.
dest-macaddress Enter the keywords dest-mac then the MAC destination address in the
nn:nn:nn:nn:nn:nn format.
vlan vlan-id Enter the keyword vlan then the VLAN ID. The range is from 1 to 4094.
252
Link Aggregation Control Protocol (LACP)