Users Guide

Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related Commands show lacp — displays the LACP conguration.
debug lacp
Debug LACP (events).
Syntax
debug lacp [events | pdu interface [in | out]]
To disable LACP debugging, use the no debug lacp [events | pdu interface [in | out]]
command.
Parameters
events (OPTIONAL) Enter the keyword events to debug the LACP event information.
pdu in | out (OPTIONAL) Enter the keyword pdu to debug the LACP Protocol Data Unit
information. Optionally, enter an inor out parameter to:
• Receive enterin
• Transmit enterout
interface in | out Enter the following keywords and slot/port or number information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
delay-restore abort-threshold
Increase the Boot Up timer to some value (>60 seconds).
Syntax
delay-restore abort-threshold <interval>
To remove use the no delay-restore abort-threshold command.
Link Aggregation Control Protocol (LACP)
243