Users Guide

connected (OPTIONAL) Enter the keyword connected to view only the directly connected
routes.
static (OPTIONAL) Enter the keyword static to view only routes congured by the ip
route command.
summary (OPTIONAL) Enter the keyword summary.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show ip route all command in the following example.
Field Description
(undened) Identies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
• + = summary routes
Destination
Identies the route’s destination IP address.
Gateway Identies whether the route is directly connected and on which interface the route
is congured.
Dist/Metric Identies if the route has a specied distance or metric.
IPv4 Routing
229