Users Guide

no shutdown
Dell(conf-if)#
show cong (from INTERFACE RANGE mode)
Display the bulk congured interfaces (group).
Syntax
show config
Command Modes CONFIGURATION INTERFACE (conf-if-range)
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf)#interface range tengigabitethernet 1/1 - 2
Dell(conf-if-range-tengig-1/1-2)#show config
!
interface TenGigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
switchport
no shutdown
Dell(conf-if-range-tengig-1/1-2)#
show
cong (from INTERFACE VLAN mode)
Displays the current conguration of the Default VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
198
Interfaces