Users Guide
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum number of
FIP snooping sessions supported per ENode server is 16.
p-snooping fc-map
Congure the FC-MAP value FIP snooping uses on all VLANs.
Syntax
fip-snooping fc-map fc-map-value
To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map
command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command Modes
• CONFIGURATION
• VLAN INTERFACE
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
p-snooping port-mode fcf
Congure the port for bridge-to-FCF links.
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf command.
Command Modes INTERFACE
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
FIP Snooping
155