Users Guide

Parameters
zoneset_namemem
ber
Enter the zoneset name.
Enter the WWPN, FC-ID, or Alias name.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version
9.7(0.0) Introduced on the M I/O Aggregator.
Example
Dell(conf)#fc zoneset test1
Dell(conf-fc-zoneset-test1)#member ?
WORD Zone Name
Dell(conf-fc-zoneset-test1)#member
Related Commands
show fc zoneset — displays the congured and active zoneset.
show fcoe-map — displays the fabric parameters.
fcoe-map
Create an FCoE map which contains the parameters used to congure the links between server CNAs and a SAN fabric. Apply the
FCoE map on a server-facing Ethernet port.
Syntax
fcoe-map map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
Command Modes CONFIGURATION
INTERFACE
Supported Modes All Modes
Command History
Version Description
9.3(0.0) Introduced on the M I/O Aggregator.
Usage Information
An FCoE map is a template to map FCoE and FC parameters in a converged fabric. An FCoE map virtualizes
upstream FC ports on an M I/O Aggregator NPIV proxy gateway to appear to downstream server CNA
ports as FCoE forwarder (FCF) ports on an FCoE network. When applied to FC and Ethernet ports on an
NPIV proxy gateway, an FCoE map allows the switch to operate as an FCoE-FC bridge between an FC SAN
and an FCoE network. It provides necessary parameters to FCoE-enabled servers and switches to log in to a
SAN fabric.
146
FC FLEXIO FPORT