Users Guide

10
FC FLEXIO FPORT
The switch is a Trident+ based switch which is plugged into the Dell M1000 Blade server chassis. The blade module contains two
slots for pluggable exible module. The goal is to provide support for direct connectivity to FC equipments through Fibre channel
ports by FC Flex IO optional module. The FC Flex IO utilizes Broadcom Montreal (BCM84757) FC/FCOE mapper to provide FCOE to
FC functionality.
active-zoneset
Activate the zoneset.
Syntax
active-zoneset zoneset_name
To change to the default zone behavior, use the no active-zoneset zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command Modes FC FABRIC CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.7(0.0) Introduced on the M I/O Aggregator.
Example
Dell(conf)# fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)# fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset zs1
Related Commands
show fc zoneset — displays the congured and active zoneset.
fabric
Apply an FCoE map on a fabric-facing Fibre Channel (FC) port.
Syntax
fabric map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
Command Modes INTERFACE FIBRE_CHANNEL
Supported Modes All Modes
FC FLEXIO FPORT
143