Users Guide

show interface dcbx detail
Displays the DCBX conguration on an interface.
Syntax
show interface port-type slot/port dcbx detail
Parameters
port-type Enter the port type.
slot/port Enter the slot/port number.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To clear DCBX frame counters, use the clear dcbx counters interface stack-unit/port
command.
The following describes the show interface dcbx detail command shown in the following example.
Field Description
Interface Interface type with chassis slot and port number.
Port-Role Congured the DCBX port role: auto-upstream, auto-downstream, cong-source,
or manual.
DCBX Operational
Status
Operational status (enabled or disabled) used to elect a conguration source and
internally propagate a DCB conguration. The DCBX operational status is the
combination of PFC and ETS operational status.
Conguration
Source
Species whether the port serves as the DCBX conguration source on the switch:
true (yes) or false (no).
Local DCBX
Compatibility mode
DCBX version accepted in a DCB conguration as compatible. In auto-upstream
mode, a port can only receive a DCBX version supported on the remote peer.
Local DCBX
Congured mode
DCBX version congured on the port: CEE, CIN, IEEE v2.5, or Auto (port auto-
congures to use the DCBX version received from a peer).
Peer Operating
version
DCBX version that the peer uses to exchange DCB parameters.
Local DCBX TLVs
Transmitted
Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV code
at the top of the show command output).
Local DCBX Status:
DCBX Operational
Version
DCBX version advertised in Control TLVs.
Local DCBX Status:
DCBX Max Version
Supported
Highest DCBX version supported in Control TLVs.
Data Center Bridging (DCB)
113