User's Manual

to transmit FCoE traffic.
Creating an FCoE Map
The values for the FCoE VLAN, fabric ID, and FC-MAP must be unique. Apply an FCoE map on
downstream server-facing Ethernet ports and upstream fabric-facing Fibre Channel ports.
Task
Command
Command Mode
Create an FCoE map.
fcoe-map map-name
CONFIGURATION
Configure the association
between the dedicated VLAN
and the fabric where the
desired storage arrays are
installed.
The fabric and VLAN ID
numbers must be the same.
The range is from 2 to 4094.
fabric-id fabric-num
vlan vlan-id
FCoE MAP
Add a text description.
The maximum is 32
characters.
description text
FCoE MAP
Specify the FC-MAP value
used to generate a fabric-
provided MAC address.
You must enter a unique MAC
address prefix as the FC-MAP
value for each fabric.
The range is from 0EFC00 to
0EFCFF.
The default is None.
fc-map fc-map-value
FCoE MAP
Configure the priority used by
a server CNA to select the FCF
for a fabric login (FLOGI). The
range is from 0 to 128. The
default is 128.
fcf-priority
priority
FCoE MAP
Enable the monitoring FIP
keepalive messages (if it is
disabled) to detect if other
FCoE devices are reachable.
The default is enabled.
keepalive
FCoE MAP
Configure the time (in
seconds) used to transmit FIP
keepalive advertisements.
The range is 8 to 90 seconds.
fka-adv-period
seconds
FCoE MAP