User's Manual

Enabling Fibre Channel Capability on the Switch
You must first enable an IOA and MXL switch with the FC Flex IO module that you want to
configure as an NPG for the FC protocol.
Task
Command
Command Mode
Enable an IOA and MXL switch
with the FC Flex IO module for
the FC protocol.
feature fc
CONFIGURATION
Creating a DCB Map
Configure the priority-based flow control (PFC) and enhanced traffic selection (ETS) settings in a
DCB map before you can apply them on downstream server-facing ports.
Task
Command
Command Mode
Create a DCB map to specify
the PFC and ETS settings for
groups of dot1p priorities.
dcb-map name
CONFIGURATION
Configure the PFC setting (on
or off) and the ETS bandwidth
percentage allocated to traffic
in each priority group or
whether priority group traffic
should be handled with strict
priority scheduling.
priority-group
group_num {bandwidth
percentage | strict-
priority} pfc {on |
off}
DCB MAP
Specify the priority group ID
number to handle VLAN
traffic for each dot1p class-of-
service: 0 through 7.
Leave a space between each
priority group number.
priority-pgid
dot1p0_group-num
dot1p1_group-num
dot1p2_group-num
dot1p3_group-num
dot1p4_group-num
dot1p5_group-num
dot1p6_group-num
dot1p7_group-num
DCB MAP