User's Manual

Active (all mandatory FCoE and FC parameters are correctly
configured)
Incomplete (either the FC-MAP value, fabric ID, or VLAN ID are not
correctly configured).
Oper-State
Operational status of link to the fabric:
Up (link is up and transmitting FC traffic)
Down (link is down and not transmitting FC traffic)
Link-wait (link is up and waiting for FLOGI to complete on peer FC
port)
Removed (port has been shut down).
The following table describes the show fcoe-map map-name output.
Field
Description
Fabric-Name
Name of a SAN fabric.
Fabric ID
The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID
The dedicated FCoE VLAN used to transport FCoE storage traffic
between servers and a fabric over the NPIV proxy gateway. The
configured VLAN ID must be the same as the fabric ID.
VLAN priority
FCoE traffic uses VLAN priority 3. (This setting is not user-
configurable.)
FC-MAP
FCoE MAC address-prefix value - The unique 24-bit MAC address
prefix that identifies a fabric.
FKA-ADV_period
Time (in seconds) used to transmit FIP keepalive advertisements.
FCF Priority
The priority used by a server to select an upstream FCoE forwarder.
Config-State
Indicates whether the configured FCoE and FC parameters in the
FCoE map are valid:
Active (all mandatory FCoE and FC parameters are correctly
configured)
Incomplete (either the FC-MAP value, fabric ID, or VLAN ID are not
correctly configured).
Oper-State
Operational status of link to the fabric:
Up (link is up and transmitting FC traffic)
Down (link is down and not transmitting FC traffic)
Link-wait (link is up and waiting for FLOGI to complete on peer FC
port)
Removed (port has been shut down).
Members
IOA and MXL Switch with the FC Flex IO module Ethernet and FC
ports that are members of the dedicated FCoE VLAN.