User's Manual

• EXEC Privilege
Command History
Version 9.3(0.0)
Usage Information
Use this command to display the FC and FCoE parameters used to
configure server-facing Ethernet (FCoE) and fabric-facing FC ports in
all FCoE maps.
In each FCoE map, the values for the fabric ID, FC-MAP, and FCoE
VLAN must be unique.
Example
Dell#show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-
Priority Config-State Oper-State
test 16 16 0efc02 128
ACTIVE UP
cnatest 1003 1003 0efc03 128
ACTIVE UP
Sitest 1004 1004 0efc04 128
ACTIVE DOWN
Dell#show fcoe-map si
Fabric Name si
Fabric Id 1004
Vlan Id 1004
Vlan priority 3
FC-MAP 0efc04
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
Members
See the following tables for field descriptions.
Related Command
•
fcoe-map
The following table describes the show fcoe-map brief output.
Field
Description
Field-Name
Name of a SAN fabric.
Fabric ID
The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID
The dedicated FCoE VLAN used to transport FCoE storage traffic
between servers and a fabric over the NPIV proxy gateway. The
configured VLAN ID must be the same as the fabric ID.
FC-MAP
FCoE MAC address-prefix value - The unique 24-bit MAC address
prefix that identifies a fabric.
FCF Priority
The priority used by a server to select an upstream FCoE forwarder.
Config-State
Indicates whether the configured FCoE and FC parameters in the
FCoE map are valid: