User's Manual

Related Commands
• fcoe-map
• show fcoe-map
fcf-priority
Configure the priority to select an upstream FCoE forwarder (FCF).
Syntax
fcf—priority priority
To remove a configured FCF priority from an FCoE map, enter the no
fcf-priority command.
Parameters
priority = Enter the fcf priority. The range is from 0 to 128.
Defaults
128
Command Modes
FCOE MAP
Command History
Version 9.3(0.0)
Usage Information
The FCF priority is used by the server CNAs to select an upstream FCF
to use for a fabric login (FLOGI).
Related Commands
• fcoe-map
• show fcoe-map
fc-map
Configure the FCoE mapped address prefix value used to identify FCoE traffic transmitted on
the FCoE VLAN for the specified fabric.
Syntax
fc—map fc-map-value
To remove a configured FC-MAP value from an FCoE map, enter the
no fc-map command.
Parameters
fc-map-value = Enter the unique MAC address prefix used by a
SAN fabric.
The range is from 0EFC00 to 0EFCFF.
Defaults
None
Command Modes
FCOE MAP
Command History
Version 9.3(0.0)
Usage Information
In an FCoE map, the FC-MAP value, fabric ID, and FCoE VLAN
parameters must be unique.
Related Commands
• fcoe-map
•
show fcoe-map
fcoe priority-bits
Configure the administrative values for advertised for the FCoE protocol in application priority
TLVs.
Syntax
fcoe priority-bits priority-bitmap
To remove the configured FCoE priority, use the no fcoe
priority-bits command.