User's Manual

Dell#
5. Configure the secondary VLT.
NOTE: Repeat steps from 1 through 4 on the secondary VLT, ensuring you use the different
backup destination and unit-id.
Dell#show vlt brief
VLT Domain Brief
------------------
Domain ID: 1
Role: Secondary
Role Priority: 32768
ICL Link Status: Up
HeartBeat Status: Up
VLT Peer Status: Up
Local Unit Id: 1
Version: 6(2)
Local System MAC address: f8:b1:56:0e:b1:7f
Remote System MAC address: 00:01:e8:e1:e1:c3
Configured System MAC address: 00:01:09:06:06:06
Remote system version: 6(2)
Delay-Restore timer: 90 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer: 0 seconds
Multicast peer-routing timeout: 150 seconds
Dell#
Dell#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status
Active VLANs
------------------- ------------ ----------- ----------
128 128 UP UP 1
Dell#
Stacking in PMUX Mode
PMUX stacking allows the stacking of two or more IOA units. This allows grouping of multiple
units for high availability. IOA supports a maximum of six stacking units.
NOTE: Prior to configuring the stack-group, ensure the stacking ports are connected and in 40G
native mode.