User's Manual

T Te 0/1
12 Active T Po128(Te 0/41-42)
T Te 0/1
13 Active T Po128(Te 0/41-42)
T Te 0/1
14 Active T Po128(Te 0/41-42)
T Te 0/1
15 Active T Po128(Te 0/41-42)
T Te 0/1
20 Active U Po128(Te 0/41-42)
U Te 0/1
Dell#
You can remove the inactive VLANs that have no member ports using the following
command:
Dell#configure
Dell(conf)#no interface vlan <vlan-id>
->vlan-id - Inactive VLAN with no member ports
You can remove the tagged VLANs using the no vlan tagged <VLAN-RANGE>
command. You can remove the untagged VLANs using the no vlan untagged
command in the physical port/port-channel.
Virtual Link Trunking (VLT) in PMUX Mode
VLT allows the physical links between two devices (known as VLT nodes or peers) within a
VLT domain to be considered a single logical link to connected external devices.
For VLT operations, use the following configurations on both the primary and secondary
VLT. Ensure the VLTi links are connected and administratively up. VLTi connects the VLT
peers for VLT data exchange.
1. Configure VLTi.
Dell#configure
Dell(conf)#int port-channel 127
Dell(conf-if-po-127)# channel-member fortygige 0/33,37
Dell(conf-if-po-127)# no shutdown
Dell(conf-if-po-127)# end