Specifications

16 Installing and Configuring the Aggregator

Unpacking the Aggregator

Package Contents

When unpacking each switch, ensure that the following items are included:

• One PowerEdge

M I/O Aggregator

switch blade

• One USB type A-to-DB-9 female cable

• Getting Started Guide

• Safety and Regulatory Information

• Warranty and Support Information

• Software License Agreement

Unpacking Steps

NOTE: Before unpacking the switch, inspect the container and immediately

report any evidence of damage.

Place the container on a clean, flat surface and cut all straps securing the

container.

Open the container or remove the container top.

Carefully remove the switch from the container and place it on a secure

and clean surface.

Remove all packing material.

Inspect the product and accessories for damage.

Installing and Configuring the

Aggregator

After you unpack the Aggregator, refer to the flow chart in Figure 1-6 for an

overview of the steps you must follow to install the blade and perform the

initial configuration.