Reference Guide

90 | Data Center Bridging
www.dell.com | support.dell.com
clear ets counters
Clear ETS TLV counters.
Syntax
clear ets counters [tengigabitethernet slot/port]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
clear pfc counters
Clear PFC TLV counters.
Syntax
clear pfc counters [stack-unit unit-number | tengigabitethernet slot/port]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
dcb enable auto-detect on-next-reload
Enables or disables global DCB on a subsequent reload. This command also internally configures PFC
buffers based on DCB enable/disable. Save and reload is mandatory for the configurations to take
effect. Auto-detect keyword can be used to re-enable IOA with port wise DCB auto detect feature.
Syntax
dcb enable {on-next-reload | auto-detect on-next-reload}
To disable global DCB on a subsequent reload, use the no dcb enable on-next-reload command.
Parameters
Defaults
DCB is globally enabled with auto-detect feature.
Command Modes
CONFIGURATION
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator
unit number
<0-5>
Number of the member stack unit. Valid values: 0 to 5. Default: 0
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator
auto-detect
Enter this key word to re-enable the Aggregator with port wise DCB auto detect
feature.