Reference Guide

82 | u-Boot
www.dell.com | support.dell.com
help
Displays the help menu.
Syntax
help
Command Modes
uBoot
Command
History
u
Example
Figure 6-3. help Command Example
ignore enable password
Ignore the enabled password.
Syntax
ignore enable-password
Command Modes
uBoot
Command
History
u
ignore startup-config
Ignore the system startup configuration.
Syntax
ignore startup-config
Command Modes
uBoot
Version 8.3.17.0 Supported on M I/O Aggregator
BOOT_USER # help
***** Dell Force10 Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (22 commands total):
boot change [primary|secondary|default]
change operating system boot parameters
boot selection [a|b]
change the rom bootstrap bootflash partition
boot show net config retries
show number of retries for network boot config failure
boot write net config retries <int>
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway <ip-address>
default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
help
display help menu
-(36%)-Use <CR> to continue, q to stop:
BOOT_USER #
Version 8.3.17.0 Supported on M I/O Aggregator