Reference Guide

76 | Control and Monitoring
www.dell.com | support.dell.com
Example
Figure 5-33. traceroute (IPv4) Command Example
Related
Commands
undebug all
Disable all debug operations on the system.
Syntax
undebug all
Defaults
none
Command Modes
EXEC Privilege
Command
History
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write {memory | terminal}
Parameters
Command Modes
EXEC Privilege
FTOS#traceroute www.force10networks.com
Translating "www.force10networks.com"...domain server (10.11.0.1) [OK]
Type Ctrl-C to abort.
---------------------------------------------------------------------------------
---------
Tracing the route to www.force10networks.com (10.11.84.18), 30 hops max, 40 byte
packets
---------------------------------------------------------------------------------
---------
TTL Hostname Probe1 Probe2 Probe3
1 10.11.199.190 001.000 ms 001.000 ms 002.000 ms
2 gwegress-sjc-02.force10networks.com (10.11.30.126) 005.000 ms 001.000 ms
001.000 ms
3 fw-sjc-01.force10networks.com (10.11.127.254) 000.000 ms 000.000 ms 000.000
ms
4 www.force10networks.com (10.11.84.18) 000.000 ms 000.000 ms 000.000 ms
FTOS#
ping Tests the connectivity to a device.
Version 8.3.17.0 Supported on M I/O Aggregator
memory Enter the keyword memory to copy the current running configuration to the startup
configuration file. This command is similar to the
copy running-config startup-config
command.
terminal Enter the keyword terminal to copy the current running configuration to the terminal. This
command is similar to the
show running-config command.