Reference Guide

54 | Control and Monitoring

www.dell.com | support.dell.com

Command

History

show environment

Displays the system component status (for example, temperature, voltage).

Syntax

show environment [all | stack-unit unit-id]

Parameters

Command Modes

EXEC

EXEC Privilege

Command

History

Example

Figure 5-9. show environment all Command Example

Example

Figure 5-10. show environment stack-unit Command Example

Version 8.3.17.0 Supported on M I/O Aggregator

all (OPTIONAL) Enter the keyword all to view all components.

stack-unit unit-id (OPTIONAL) Enter the keyword stack-unit followed by the unit-id to display

information on a specific stack member. Range: 0 to 5.

thermal sensor

(OPTIONAL) Enter the keyword thermal-sensor to view all components.

Version 8.3.17.0 Supported on M I/O Aggregator

FTOS#show environment all

-- Unit Environment Status --

Unit Status Temp Voltage TempStatus

---------------------------------------------------------------------------

* 1 online 66C ok 2

* Management Unit

-- Thermal Sensor Readings (deg C) --

Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5 Sensor6 Sensor7

Sensor8 Sensor9

--------------------------------------------------------------------------------

----------------

1 51 51 63 61 61 61 67 61 64