Reference Guide

File Management | 35

Example

Figure 4-15. show version Command Example

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax

upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 | all} {booted | flash: |ftp: |

tftp: | usbflash:} (A: | B:}

Parameters

Table 4-2. show version Command Fields

Lines beginning with Description

Dell Force10 Network... Name of the operating system

Dell Force10 Operating... OS version number

Dell Force10 Application... Software version

Build Time... Software build’s date stamp

Build Path... Location of the software build files loaded on the system

Dell Force10 uptime is... Amount of time the system has been up

System image... Image file name

Chassis Type:

System type (M I/O Aggregator)

Control Processor:... Control processor information and amount of memory on processor.

256M bytes... Amount of boot flash memory on the system.

1 34-Port... Hardware configuration of the system, including the number and type of

physical interfaces available.

FTOS#show version

Dell Force10 Real Time Operating System Software

Dell Force10 Operating System Version: 1.0

Dell Force10 Application Software Version: E8-3-17-38

Build Time: Thu Jul 19 05:59:59 PDT 2012

Build Path: /sites/sjc/work/swsystems01-2/ravisubramani/ravis-8317/SW/SRC/

Cp_src/Tacacs

FTOS uptime is 4 day(s), 4 hour(s), 3 minute(s)

System image file is "dv-m1000e-2-b2"

System Type: I/O-Aggregator

Control Processor: MIPS RMI XLP with 2147483648 bytes of memory.

256M bytes of boot flash memory.

1 34-port GE/TE (XL)

56 Ten GigabitEthernet/IEEE 802.3 interface(s)

FTOS#

all

Enter this keyword to change both the bootflash and bootselecter images.

bootflash-image

Enter this keyword to change the bootflash image.

bootselector-image

Enter this keyword to change the bootselector image

0-5

Enter this keyword to upgrade only the mentioned stack-unit