Reference Guide

242 | Uplink Failure Detection (UFD)
www.dell.com | support.dell.com
show uplink-state-group
Displays status information on a specified uplink-state group or all groups.
Syntax
show uplink-state-group [group-id] [detail]
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-2. show uplink-state-group Command Examples
Related
Commands
group-id Displays status information on a specified uplink-state group or all
groups. Valid group-id values are 1 to 16.
detail Displays additional status information on the upstream and
downstream interfaces in each group
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show uplink-state-group
Uplink State Group: 1 Status: Enabled, Down
FTOS#
FTOS#show uplink-state-group 1
Uplink State Group: 1 Status: Enabled, Down
FTOS#
FTOS#
FTOS#show uplink-state-group 1 detail
(Up): Interface up (Dwn): Interface down (Dis): Interface disabled
Uplink State Group : 1 Status: Enabled, Down
Defer Timer : 10 sec
Upstream Interfaces : Po 128(Dwn)
Downstream Interfaces : Te 0/1(Dis) Te 0/2(Dis) Te 0/3(Dis) Te 0/4(Dis) Te 0/
5(Dis)
Te 0/6(Dis) Te 0/7(Dis) Te 0/8(Dis) Te 0/9(Dis) Te 0/
10(Dis)
Te 0/11(Dis) Te 0/12(Dis) Te 0/13(Dis) Te 0/14(Dis) Te 0/
15(Dis)
Te 0/16(Dis) Te 0/17(Dis) Te 0/18(Dis) Te 0/19(Dis) Te 0/
20(Dis)
Te 0/21(Dis) Te 0/22(Dis) Te 0/23(Dis) Te 0/24(Dis) Te 0/
25(Dis)
Te 0/26(Dis) Te 0/27(Dis) Te 0/28(Dis) Te 0/29(Dis) Te 0/
30(Dis)
Te 0/31(Dis) Te 0/32(Dis) Te 1/1(Dis) Te 1/2(Dis) Te 1/
3(Dis)
Te 1/4(Dis) Te 1/5(Dis) Te 1/6(Dis) Te 1/7(Dis) Te 1/8(Dis)
Te 1/9(Dis) Te 1/10(Dis) Te 1/11(Dis) Te 1/12(Dis) Te 1/
13(Dis)
Te 1/14(Dis) Te 1/15(Dis) Te 1/16(Dis) Te 1/17(Dis) Te 1/
18(Dis)
Te 1/19(Dis) Te 1/20(Dis) Te 1/21(Dis) Te 1/22(Dis) Te 1/
23(Dis)
Te 1/24(Dis) Te 1/25(Dis) Te 1/26(Dis) Te 1/27(Dis) Te 1/
28(Dis)
Te 1/29(Dis) Te 1/30(Dis) Te 1/31(Dis) Te 1/32(Dis)
show running-config
uplink-state-group
Displays the current configuration of one or more uplink-state groups.