Reference Guide

22 | File Management
www.dell.com | support.dell.com
boot system gateway
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
Parameters
Command Modes
CONFIGURATION
Command
History
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
configuration file is deleted.
boot system stack-unit
Specify the location of the FTOS image to be used to boot the system.
Syntax
boot system stack-unit <0-5 | all> {default | primary | secondary}
Parameters
Command Modes
CONFIGURATION
Command
History
Usage
Information
The system first attempts to load the image from the primary path. If it fails to boot, the system will try
to load the image from the secondary path and if that too fails, the system will load the default image.
cd
Change to a different working directory.
Syntax
cd directory
Parameters
Command Modes
EXEC Privilege
ip-address
Enter an IP address in dotted decimal format.
Version 8.3.17.0 Supported on M I/O Aggregator
0-5
Enter the stack member unit identifier of the stack member.
all
Enter this keyword to set the primary, secondary, and default images for the
system.
default
Enter this keyword to set the default image path for the system.
primary
Enter this keyword to set the primary image path for the system.
secondary
Enter this keyword to set the secondary image path for the system.
Version 8.3.17.0 Supported on M I/O Aggregator
directory
(OPTONAL) Enter one of the following:
•
flash: (internal Flash) or any sub-directory
• usbflash: (external Flash) or any sub-directory