Reference Guide

226 | Stacking Commands
www.dell.com | support.dell.com
stack-unit iom-mode
Toggle the M I/O Aggregator operating mode from standalone to stack or vice-versa.
Syntax
stack-unit <unit-number> iom-mode [stack | standalone]
Parameters
Defaults
standalone
Command Modes
CONFIGURATION
Command
History
Related
Commands
Example
Figure 21-7. show system stack-unit stack-group Command Example
unit number
<0-5>
Number of the member stack unit. Valid values: 0 to 5. Default: 0.
stack
Enable stack mode.
standalone
Enable stand-alone mode.
Version 8.3.17.0 Supported on M I/O Aggregator
reload Reboots FTOS.
show system Displays the current status of all stack members or a specific member.
FTOS(conf)#stack-unit 0 iom-mode stack
% You are about to stack your IOA module, please reload the IOA
and then plug in the stacking cable for the changes to take effect.
FTOS(conf)#
FTOS#