Reference Guide

Stacking Commands | 225
Example
Figure 21-5. show system stack-unit fanout Command Example
show system stack-unit stack-group
Displays the stack-groups present/configured for a M I/O Aggregator stack unit.
Syntax
show system stack-unit <unit-number> stack-group [configured]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
Example
Figure 21-6. show system stack-unit stack-group Command Example
FTOS#show system stack-unit 0 fanout ?
configured Configured fan out ports
FTOS#show system stack-unit 0 fanout configured ?
| Pipe through a command
<cr>
FTOS#show system stack-unit 0 fanout configured
Configured fan out ports in stack-unit 0
Configured Next Boot
33 33
37 37
41 41
45 45
FTOS#
unit number
<0-5>
Number of the member stack unit. Valid values: 0 to 5. Default: 0.
Version 8.3.17.0 Supported on M I/O Aggregator
reload Reboots FTOS.
show system Displays the current status of all stack members or a specific member.
FTOS#show system stack-unit 0 stack-group ?
configured Configured stack groups
| Pipe through a command
<cr>
FTOS#show system stack-unit 0 stack-group configured
Configured stack groups in stack-unit 0
FTOS##show system stack-unit 0 stack-group
Stack group Ports
------------------------------------
0 0/33
1 0/37
2 0/41
3 0/45
FTOS#