Reference Guide

Stacking Commands | 223
Related
Commands
show system stack-ports
Displays information about the stacking ports on all switches in the M I/O Aggregator switch stack.
Syntax
show system stack-ports [status | topology]
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 21-2. show system stack-ports Command Example
Example
Figure 21-3. show system stack-ports status Command Example
reload Reboots FTOS.
power-cycle stack-unit Resets the designated stack member.
status (OPTIONAL) Enter the keyword status to display the command output without the
Connection field.
topology (OPTIONAL) Enter the keyword topology to limit the table to just the Interface and
Connection fields.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show system stack-ports
Topology: Daisy chain
Interface Connection Link Speed Admin Link Trunk
(Gb/s) Status Status Group
------------------------------------------------------------------
0/33 40 up down
0/37 1/37 40 up up
1/33 40 up down
1/37 0/37 40 up up
FTOS#
TOS#show system stack-ports status
Topology: Daisy chain
Interface Link Speed Admin Link Trunk
(Gb/s) Status Status Group
-------------------------------------------------------
0/33 40 up down
0/37 40 up up
1/33 40 up down
1/37 40 up up