Reference Guide

Simple Network Management Protocol (SNMP) and Syslog | 217
Example 1
Figure 20-1. show logging Command Example
Example 2
Figure 20-2. show logging history Command Example
FTOS#show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 168 Messages Logged, Size (40960
bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Aug 1 15:05:53: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from console
Jul 31 20:25:40: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 20:14:03: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 20:03:58: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 18:22:10: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 15:50:30: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 14:26:22: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from
console
Jul 31 14:26:17: %STKUNIT1-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS:
Enable pas
sword authentication success on console
Jul 31 14:26:17: %STKUNIT1-M:CP %SEC-4-ENABLE_PASSW_NOT_CONFIGURED:
Enable passw
ord is required for authentication but not configured
Jul 31 10:38:12: %STKUNIT1-M:CP %SYSADM-5-CPU_THRESHOLD_CLR: Overall cpu
usage o
f management-unit drops below threshold. Cpu1minUsage (65%)
--More--
FTOS#show logging history
Syslog History Table: 1 maximum table entries,
saving level warnings or higher
SNMP notifications not Enabled
May 22 08:53:09: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS:
Enable password authentication success on vty0 ( 10.11.68.22 )
FTOS#