Reference Guide

Simple Network Management Protocol (SNMP) and Syslog | 213
logging history
Specify which messages are logged to the history table of the switch and the SNMP network
management station (if configured).
Syntax
logging history level
To return to the default values, use the no logging history command.
Parameters
Defaults
4 or warnings
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging history size
Specify the number of messages stored in the FTOS logging history table.
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
Defaults
1 message
Command Modes
CONFIGURATION
Command
History
Usage
Information
When the number of messages reaches the limit you set with the logging history size command, older
messages are deleted as newer ones are added to the table.
Related
Commands
level
Indicate a value from 0 to 7 or enter one of the following equivalent words:
emergencies, alerts, critical, errors, warnings, notifications, informational, or
debugging.
The default is 4.
Version 8.3.17.0 Supported on M I/O Aggregator
show logging history Displays information logged to the history buffer.
size
Indicate a value as the number of messages to be stored.
Range: 0 to 500.
Default: 1 message.
Version 8.3.17.0 Supported on M I/O Aggregator
show logging history Displays information logged to the history buffer.