Reference Guide

Layer 2 | 187
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
stack-unit unit_number (REQUIRED) Enter the keyword stack-unit followed by a stack member
number to select the stack unit for which to gather information.
Range: 0 to 5
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number
to select the Port-Pipe for which to gather information.
Range: 0
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC address
specifically configured on the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
Version 8.3.17.0 Supported on M I/O Aggregator