Reference Guide

186 | Layer 2
www.dell.com | support.dell.com
clear mac-address-table dynamic
Clear the MAC address table of all MAC address learned dynamically.
Syntax
clear mac-address-table dynamic {address mac-address | all | interface interface | vlan vlan-id}
Parameters
Command Modes
EXEC Privilege
Command
History
description
Add a description about the selected VLAN.
Syntax
description description
To remove the description from the VLAN, use the no description command.
Parameters
Defaults
none
Command Modes
INTERFACE VLAN
Command
History
Related
Commands
show cam mac stack-unit
Displays the Content Addressable Memory (CAM) size and the portions allocated for MAC addresses
and for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id] [interface interface]
address mac-address Enter the keyword address followed by a MAC address in
nn:nn:nn:nn:nn:nn format.
all Enter the keyword all to delete all MAC address entries in the MAC address
table.
interface interface
Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id Enter the keyword vlan followed by a VLAN ID number from 1 to 4094.
Version 8.3.17.0 Supported on M I/O Aggregator
description
Enter a text string description to identify the VLAN (80 characters maximum).
Version 8.3.17.0 Supported on M I/O Aggregator
show vlan Displays VLAN configuration.