Reference Guide

Data Center Bridging | 105
Example
Figure 7-11. show stack-unit stack-ports ets detail Command Example
show stack-unit stack-ports pfc detail
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-number} pfc detail
Parameters
Command Mode
CONFIGURATION
Command
History
Example
Figure 7-12. show stack-unit all stack-ports all pfc details Command Example
FTOS#show stack-unit all stack-ports all ets details
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
FTOS#
stack-unit
Enter the stack unit.
port-number
Enter the port number.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show stack-unit all stack-ports all pfc details
stack unit 1 stack-port all
Admin mode is On
Admin is enabled
Local is enabled
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
FTOS#