Reference Guide

Data Center Bridging | 101
show interface pfc
Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link
delay.
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
Command Mode
EXEC Privilege
Command
History
Example
Figure 7-8. show interface pfc summary Command Example
port-type slot/port
pfc
Enter the port-type slot and port PFC information.
{summary | detail} Enter the keyword summary for a summary list of results or enter the keyword detail
for a full list of results.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS# show interfaces tengigabitethernet 0/49 pfc summary
Interface TenGigabitEthernet 0/49
Admin mode is on
Admin is enabled
Remote is enabled, Priority list is 4
Remote Willing Status is enabled
Local is enabled
Oper status is Recommended
PFC DCBX Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quantams
Application Priority TLV Parameters:
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
FTOS#