Owner`s manual

Data Center Bridging (DCB) | 79
Figure 5-15. Example: PFC and ETS Applied to LAN, IPC, and SAN Priority Traffic
QoS Traffic Classification: On the Aggregator, the service-class dynamic dot1p command has been used in
Global Configuration mode to map ingress dot1p frames to the queues shown in Table 5-6. For more
information, refer to dcb enable auto-detect on-next-reload Command Example.
dot1p priority 3
dot1p priority
0, 1, 2, 4, 5
dot1p priority 0-7
Converged LAN, SAN, and IPC traffic
SAN
priority 3
IPC
priority 4