Owner`s manual

Getting Started | 31
Figure 3-13. Tracking Changes with Configuration Comments
File System Management
The Dell Networking system can use the internal Flash, USB Flash, or remote devices to store files. The
system stores files on the internal Flash by default, but you can configure it to store files elsewhere.
To view file system information:
The output of the
show file-systems command (Figure 3-14) shows the total capacity, amount of free
memory, file structure, media type, and read/write privileges for each storage device in use.
Figure 3-14. show file-systems Command Example
Task Command Syntax Command Mode
View information about each file system.
show file-systems
EXEC Privilege
FTOS#show running-config
Current Configuration ...
! Version E8-3-17-38
! Last configuration change at Tue Jul 24 20:33:08 2012 by default
!
boot system stack-unit 1 primary tftp://10.11.9.21/dv-m1000e-2-b2
boot system stack-unit 1 default system: A:
boot system gateway 10.11.209.62
!
redundancy auto-synchronize full
!
service timestamps log datetime
!
hostname FTOS
!
--More--
FTOS#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
2143281152 836878336 FAT32 USERFLASH rw flash:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
FTOS#