Owner`s manual

Getting Started | 29
Figure 3-11. Restoring the Factory Default Settings
View Files
You can only view file information and content on local file systems.
To view a list of files on the internal or external Flash, follow this step:
The output of the command
dir also shows the read/write privileges, size (in bytes), and date of
modification for each file (Figure 3-12).
Step Task Command Syntax Command Mode
1 View a list of files on:
the internal flash
dir flash:
EXEC Privilege
the usbflash
dir usbflash:
EXEC Privilege
FTOS#restore factory-defaults stack-unit 0 nvram
***********************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
0 Success
Power-cycling the unit(s).
....