Owner`s manual

210 | Simple Network Management Protocol (SNMP)
www.dell.com | support.dell.com
For L3 LAG, you do not have this support.
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500842) 23:36:48.42
SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkDown
IF-MIB::ifIndex.33865785 = INTEGER: 33865785
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING: "OSTATE_DN: Changed interface state to down: Tengig 0/
0"
2010-02-10 14:22:39 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500842) 23:36:48.42
SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkDown
IF-MIB::ifIndex.1107755009 = INTEGER: 1107755009
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING: "OSTATE_DN: Changed interface state to down: Po 1"
2010-02-10 14:22:40 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500932) 23:36:49.32 SNMPv2-MIB::snmpTrapOID.0 = OID:
IF-MIB::linkUp IF-MIB::ifIndex.33865785 = INTEGER: 33865785 SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 =
STRING: "OSTATE_UP: Changed interface state to up: Tengig 0/0"
2010-02-10 14:22:40 10.16.130.4 [10.16.130.4]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8500934) 23:36:49.34 SNMPv2-MIB::snmpTrapOID.0 = OID:
IF-MIB::linkUp IF-MIB::ifIndex.1107755009 = INTEGER: 1107755009
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING: "OSTATE_UP: Changed interface state to up: Po 1"
Entity MIBS
The Entity MIB provides a mechanism for presenting hierarchies of physical entities using SNMP tables.
The Entity MIB contains the following groups, which describe the physical elements and logical elements
of a managed system. The following tables are implemented for the Aggregator.
• Physical Entity: A physical entity or physical component represents an identifiable physical resource
within a managed system. Zero or more logical entities may utilize a physical resource at any given
time. Determining which physical components are represented by an agent in the EntPhysicalTable is
an implementation-specific matter. Typically, physical resources (for example, communications ports,
backplanes, sensors, daughter-cards, power supplies, and the overall chassis), which you can manage
via functions associated with one or more logical entities, are included in the MIB.
• Containment Tree: Each physical component may be modeled as contained within another physical
component. A containment-tree is the conceptual sequence of entPhysicalIndex values that uniquely
specifies the exact physical location of a physical component within the managed system. It is
generated by following and recording each entPhysicalContainedIn instance up the tree towards the
root, until a value of zero indicating no further containment is found.
Figure 15-14. Sample Entity MIBS outputs
FTOS#show inventory optional-module
Unit Slot Expected Inserted Next Boot Status/Power(On/Off)
------------------------------------------------------------------------
1 0 SFP+ SFP+ AUTO Good/On
1 1 QSFP+ QSFP+ AUTO Good/On
* - Mismatch
FTOS#