Deployment Guide
Option Number and Description
DHCP Message
Type
Option 53
• 1: DHCPDISCOVER
• 2: DHCPOFFER
• 3: DHCPREQUEST
• 4: DHCPDECLINE
• 5: DHCPACK
• 6: DHCPNACK
• 7: DHCPRELEASE
• 8: DHCPINFORM
Parameter Request
List
Option 55
Clients use this option to tell the server which parameters it requires. It is a series of octets where each octet is
DHCP option code.
Renewal Time Option 58
Species the amount of time after the IP address is granted that the client attempts to renew its lease with the
original server.
Rebinding Time Option 59
Species the amount of time after the IP address is granted that the client attempts to renew its lease with any
server, if the original server does not respond.
End Option 255
Signals the last option in the DHCP packet.
Option 82
RFC 3046 (the relay agent information option, or Option 82) is used for class-based IP address assignment.
The code for the relay agent information option is 82, and is comprised of two sub-options, circuit ID and remote ID.
Circuit ID
This is the interface on which the client-originated message is received.
Remote ID This identies the host from which the message is received. The value of this sub-option is the MAC address of
the relay agent that adds Option 82.
The DHCP relay agent inserts Option 82 before forwarding DHCP packets to the server. The server can use this information to:
• track the number of address requests per relay agent. Restricting the number of addresses available per relay agent can harden a
server against address exhaustion attacks.
• associate client MAC addresses with a relay agent to prevent oering an IP address to a client spoong the same MAC address on a
dierent relay agent.
• assign IP addresses according to the relay agent. This prevents generating DHCP oers in response to requests from an unauthorized
relay agent.
The server echoes the option back to the relay agent in its response, and the relay agent can use the information in the option to forward a
reply out the interface on which the request was received rather than ooding it on the entire VLAN.
The relay agent strips Option 82 from DHCP responses before forwarding them to the client.
To insert Option 82 into DHCP packets, follow this step.
Dynamic Host
Conguration Protocol (DHCP) 77