Deployment Guide

Figure 36. Installing and Conguring Flowchart for FC Flex IO Modules
To see if a switch is running the latest Dell Networking OS version, use the show version command. To download a Dell Networking OS
version, go to http://support.dell.com.
Installation
Site Preparation
Before installing the switch or switches, make sure that the chosen installation location meets the following site requirements:
• Clearance — There is adequate front and rear clearance for operator access. Allow clearance for cabling, power connections, and
ventilation.
• Cabling — The cabling is routed to avoid sources of electrical noise such as radio transmitters, broadcast ampliers, power lines, and
uorescent lighting xtures.
• Ambient Temperature — The ambient switch operating temperature range is 10° to 35ºC (50° to 95ºF).
FC Flex IO Modules
305