Deployment Guide

• Congure the packets per second (pps) of multicast trac allowed on C-Series and S-Series networks only.
CONFIGURATION mode
storm-control multicast packets_per_second in
• Congure the packets per second of unknown-unicast trac allowed in or out of the network.
CONFIGURATION mode
storm-control unknown-unicast [packets_per_second in]
Conguring Storm Control from INTERFACE Mode
To congure storm control, use the following command.
You can only congure storm control for ingress trac in INTERFACE mode. If you congure storm control from both INTERFACE and
CONFIGURATION mode, the INTERFACE mode congurations override the CONFIGURATION mode congurations.
• Congure storm control.
INTERFACE mode
• Congure the percentage of broadcast trac allowed on an interface (ingress only).
INTERFACE mode
storm-control broadcast packets_per_second in
• Congure the percentage of multicast trac allowed on C-Series or S-Series interface (ingress only) network only.
INTERFACE mode
storm-control multicast packets_per_second in
• Shut down the port if it receives the PFC/LLFC packets more than the congured rate.
INTERFACE mode
storm-control pfc-llfc pps in shutdown
NOTE
: PFC/LLFC storm control enabled interface disables the interfaces if it receives continuous PFC/LLFC packets. It
can be a result of a faulty NIC/Switch that sends spurious PFC/LLFC packets.
Storm Control 261