Configuration manual

and VLAN ID numbers must be the same.
Fabric and VLAN ID range: 2-4094.
For example: fabric id 10 vlan 10
3
Add a text description of the settings in the
FCoE map.
Maximum: 32 characters.
description text
FCoE MAP
4
Specify the FC-MAP value used to generate a
fabric-provided MAC address, which is
required to send FCoE traffic from a server on
the FCoE VLAN to the FC fabric specified in
Step 2. Enter a unique MAC address prefix as
the FC-MAP value for each fabric.
Range: 0EFC00–0EFCFF.
Default: None.
fc-map
fc-map-value
FCoE MAP
5
Configure the priority used by a server CNA to
select the FCF for a fabric login (FLOGI).
Range: 1-255. Default: 128.
fcf-priority
priority
FCoE MAP
6
Enable the monitoring FIP keep-alive
messages (if it is disabled) to detect if other
FCoE devices are reachable. Default: FIP keep-
alive monitoring is enabled.
keepalive
FCoE MAP
7
Configure the time interval (in seconds) used
to transmit FIP keepalive advertisements.
Range: 8-90 seconds. Default: 8 seconds.
fka-adv-period
seconds
FCoE MAP
Applying an FCoE Map on Server-facing Ethernet Ports
You can apply multiple FCoE maps on an Ethernet port or port channel. When you apply an FCoE map on
a server-facing port or port channel:
• The port is configured to operate in hybrid mode (accept both tagged and untagged VLAN frames).
• The associated FCoE VLAN is enabled on the port or port channel.
When you enable a server-facing Ethernet port, the servers respond to the FIP advertisements by
performing FLOGIs on upstream virtualized FCF ports. The NPG forwards the FLOGIs as fabric discovery
(FDISC) messages to a SAN switch.
Step Task Command Command Mode
1
Configure a server-facing Ethernet port or
port channel with an FCoE map.
interface
{tengigabitEthernet
slot/port |
fortygigabitEthernet
CONFIGURATION
FC Flex IO Modules
277