Configuration manual

Apply the DCB map on an
Ethernet port. Repeat this step to
apply a DCB map to more than
one port.
dcb-map
name
INTERFACE
Creating an FCoE VLAN
Create a dedicated VLAN to send and receive FC traffic over FCoE links between servers and a fabric over
an NPG. The NPG receives FCoE traffic and forwards de-capsulated FC frames over FC links to SAN
switches in a specified fabric.
When you apply an FCoE map to an Ethernet port, the port is automatically configured as a tagged
member of the FCoE VLAN.
Task
Command Command Mode
Create the dedicated VLAN for
FCoE traffic.
The range is from 2 to 4094.
VLAN 1002 is commonly used to
transmit FCoE traffic.
interface vlan
vlan-id
CONFIGURATION
Creating an FCoE Map
The values for the FCoE VLAN, fabric ID, and FC-MAP must be unique. Apply an FCoE map on
downstream server-facing Ethernet ports and upstream fabric-facing Fibre Channel ports.
Task
Command Command Mode
Create an FCoE map.
fcoe-map map-name
CONFIGURATION
Configure the association
between the dedicated VLAN and
the fabric where the desired
storage arrays are installed.
The fabric and VLAN ID numbers
must be the same.
The range is from 2 to 4094.
fabric-id
fabric-num vlan
vlan-id
FCoE MAP
Add a text description. The
maximum is 32 characters.
description text
FCoE MAP
Specify the FC-MAP value used
to generate a fabric-provided
MAC address. You must enter a
unique MAC address prefix as the
FC-MAP value for each fabric.
The range is from 0EFC00 to
0EFCFF. The default is None.
fc-map
fc-map-value
FCoE MAP
Configure the priority used by a
server CNA to select the FCF for
a fabric login (FLOGI). The range
fcf-priority priority
FCoE MAP
PMUX Mode of the IO Aggregator
235