Configuration manual

Command Syntax Command Mode Purpose
clear lldp counters [interface] EXEC Privilege Clear counters for LLDP frames sent to and
received from neighboring devices on all
Aggregator interfaces or on a specified interface.
interface specifies a 10GbE uplink port in the
format: tenGigabitEthernet slot/port.
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
• View a readable version of the TLVs.
debug lldp brief
• View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU.
debug lldp detail
Figure 23. The debug lldp detail Command — LLDPDU Packet Dissection
146
Link Layer Discovery Protocol (LLDP)